Brookfield DV2+Pro Viscometer Bedienungsanleitung PDF herunterladen (Seite 18)

100

101

Brookeld Engineering Labs., Inc. Page 18 Manual No. M03-165-F0612

SR 40.0 20.1C

6.0RPM % 15.6

Figure II-13

OnemorepressoftheSELECTDISPLAYkeywouldresultinareturntotheviscosityscreen,

as shown in Figure II-11.

Note:

1. Youmaystepthroughthedisplayatanytime.Thiswillnotinterrupt

any Viscometer calculations that are in progress.

2. Display of shear rate and shear stress requires selection of appropriate

spindles. Otherwise, values displayed will be zero (0). Refer to

Appendix D.

Shear rate and shear stress values will be displayed for any spindle with a SRC value greater

than zero.

Units of Measurement

 TheDV-II+ProViscometercanbeconguredusingtheSETUPoption(SectionIV.2.2)todisplay/

print in either the CGS or SI system of units.

II.5

ENTER

AUTO

RANGE

Autorange

The

ENTER/AUTO RANGE key functions as Auto Range and allows you to determine the maximum

calculated viscosity (full scale reading) possible with the current spindle/speed setting only when in

the default screen. Pressing the key at any time will cause the current viscosity display to change

and show that maximum viscosity. Thescreenareadisplaying%(torque)willnowdisplayaashing

“%100.0”toindicatethisspecialcondition.Thismaximumviscosityandashing%100.0value

will be displayed for as long as the

ENTER/AUTO RANGE key is depressed. Figure II-14 shows the

AUTO RANGE function for the situation where the No. 1 LV spindle is rotating at 60 rpm. The full

scale range is 100.0 cP (or 100.0 mPa

s).

cP 100.0 S61

60 RPM % 100

Figure II-14

Note:

1. If the RPM is 0.0, the maximum viscosity displayed will be 0.0 cP (or 0.0 mPa

s).

2. While the Viscometer is in the Auto Range mode, any data sent to an attached

printerorcomputerreectsthedisplayedvalues(i.e.AutoRangevalues).

3. This function is only available when in the default screen.

4. If the motor is Off, Auto Range is not available.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 100 101

Kommentare zu diesen Handbüchern

Keine Kommentare

Brookfield DV2+Pro Viscometer Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Brookfield DV2+Pro Viscometer