Brookfield Dial Viscometer Bedienungsanleitung PDF herunterladen (Seite 10)

Brookfield Engineering Laboratories, Inc. Page 10 Manual No. M/85-150-P700

Remove the sample cup and attach the cone to the Viscometer (Note: left hand threads), using the spindle

wrench to hold the Viscometer shaft (Figure A2). Note: Lift up gently on the spindle wrench.

Figure A2

Attach the sample cup and swing the clip under the cup to secure it in place. Take care to avoid hitting

the cone with the cup (Figure A3). Note: Do not add test sample during the gap setting procedure.

Figure A3

Start the Viscometer running at 10 or 12 rpm. Readings of % Torque (dial reading) will be utilized for

setting the cone/plate gap. If the display reading jumps to 0.5% of scale (or higher), or will not settle to

zero (indicating that the pins on the cone and cup are hitting), unscrew the adjustment ring by turning

it to the left (clockwise as you look down on the instrument) until the reading settles at 0.0% (Figure A4).

These surfaes

must be clean!

Spindle Wrench

Cone

Do Not Hit

the CONE

with the CUP!

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Keine Kommentare

Brookfield Dial Viscometer Bedienungsanleitung Seite 10