Brookfield DV-III Ultra Rheometer Bedienungsanleitung PDF herunterladen (Seite 22)

Brookeld Engineering Laboratories, Inc. Page 22 Manual No. M98-211-E0912

VISCOMETER SETUP

PRESS ENTER TO START

Figure II-9

Press the

ENTER key. The screen in Figure II-10 appears. Press the "3" key for NO.

PRINT PARAM RAM?

1 = YES 3 = NO

Figure II-10

The display will now ask “SPECIAL SPINDLE?” as shown in Figure II-11. Press the “1” key

for YES.

SPECIAL SPINDLE?

1 = YES 3 = NO

Figure II-11

The display will ask “ADD A SPINDLE?” Press the “1” key for YES.

ADD A SPINDLE?

1 = YES 3 = NO

Figure II-12

The spindle number and name will be ashing. Use the “2” key for scrolling downward (ê) and

the “8” key for scrolling upward (è). The spindle name can be changed to any (2) letters from A

to Z.

Use the “tab” key to move left and right through the menu. Press the “enter” key to accept.

SPECIAL SPINDLE #1

NAME = D AA E

SMC =

SRC =

Figure II-13

Check the spindle constants to be entered. You must have the SMC (spindle multiplier constant)

and the SRC (the shear rate constant). Enter the rst set of numbers. Press the “enter” key to go

to the next line (example: spindle AA = SMC = 1.0 SRC = 2.0).

If you are adding additional spindles, press the “enter” key. You can enter up to 5 special

spindles.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 132 133

Keine Kommentare

Brookfield DV-III Ultra Rheometer Bedienungsanleitung Seite 22