Brookfield DV-III Rheometer Bedienungsanleitung PDF herunterladen (Seite 7)

Brookfield Engineering Laboratories, Inc. Page 7 Manual No. M/98-211-A0701

2) Insert the mounting handle on the back of the DV-III+ into the hole on the clamp assembly

(Figure 2).

Figure 2

3) Tighten the DV-III+ clamp Screw (Figure 2).

Note: If the clamp assembly moves along the upright rod too freely, tighten the

tension screw (see Appendix F).

4) Insert the ribbon cable into the DV-III+ Rheometer head. Insert the other end of the ribbon

cable into the connector on the DV-III+ base (see Figure 3).

Bubble Level

Rack Gear

Clamp Screw

Clamp Assembly

Upright Rod

Mounting Handle

1 2 3 4 5 6 7 8 9 10 11 12 ... 82 83

Keine Kommentare

Brookfield DV-III Rheometer Bedienungsanleitung Seite 7